ST WHEEL SPACERS
ST shaft nuts with a 60° taper seat must be used to mount the wheel. The mounting holes of the wheel must have 60° taper seat, too. Additionally please check before assembly if the shaft of the ST shaft nut fits through the mounting holes of the wheel. ST shaft nuts can only be used in combination with system DZX.
ST shaft nuts must be ordered seperately. / ATTENTION! Pleases consider minimum thread engagement. / M12x1.25 at least 12.0 turns (15mm supporting thread) / M12x1.50 at least 10.0 turns (15mm supporting thread) / M14x1.50 at least 12.5 turns (19mm supporting thread) / 1/2“ at least 12.0 turns (16mm supporting thread)