AIRTEC Stage 3 Intercooler Upgrade for Focus RS Mk2

SKU: ATINTFO23.
Category: .

AIRTEC Stage 3 Intercooler Upgrade for Focus RS Mk2

£695.00 (£579.17 excl. VAT)

    • £
    • £
    • £

Airtec stage 3 is the only off the shelf intercooler that uses a 100mm deep core! we use this core only in the most extreme coolers, we name the 100mm core ‘GobStopper’ due to it’s amazing cooling properties

The Airtec stage 2 had already proved itself in the Focus RS tuning scene as the must have mod for 400+ cars, we wanted to take the stage 3 to a whole new level and it took well over 10 month’s to get perfect.

Every Stage 3 Intercooler comes with a 70mm cold side hose, if you have a big boost pipe kit fitted, your Hot side pipework will still fit.

Features of Stage 3.

  • Smooth flow curved end tanks, for that ultimate flow
  • Cold side Intercooler end tank made with 70mm outlet to match the throttle body outlet
  • 70mm Alloy’silicon cold side hose, if you have a big boost pipe kit fitted, your Hot side pipework will still fit
  • Huge high flow 100mm core AKA ‘The GobStopper’
  • Air-Ram Scoop, forces Air directly into core of intercooler
  • Fitting takes 2-3 hours max, NO Bumper removal required
  • Increased BHP & torque Figure
  • Available in Pro-Series Black or Natural Silver
  • Strongest Intercooler available, backed up by our 3 year warranty.
  • Made by Europes No.1 Intercooler supplier for the Mk2 RS

Test results

  • AIRTEC Stage2 Intercooler – Max power 594.2 bhp & 546.3 lbft torque 
  • Run 1 Air temp into Intercooler 164 degrees & Air temp out of Intercooler 25 degrees
  • Run 2 Air temp into Intercooler 163 degrees & Air temp out of Intercooler 27 degrees
  • Run 3 Air temp into Intercooler 168 degrees & Air temp out of Intercooler 28 degrees
  • AIRTEC Stage3 Intercooler – Max power 631.5 bhp & 600.5 lbft torque 
  • Run 1 Air temp into Intercooler 166 degrees & Air temp out of Intercooler 21 degrees
  • Run 2 Air temp into Intercooler 167 degrees & Air temp out of Intercooler 22 degrees
  • Run 3 Air temp into Intercooler 171 degrees & Air temp out of Intercooler 22 degrees

Gains of 37.3+ bhp peak & 54.2 lbft torque increase. This was simply by swapping from stage2 to stage3, Please note if you were fitting stage 3 on a 400+bhp car you would not see gains like above, this intercooler was designed for Genuine 500+ bhp cars, it will improve a 400+ bhp car but not to the level of the car on test.

Approximate dimensions:

220mm height

100mm thick

Approximately 940mm wide

  • Focus RS Mk2
  • Intercooler
  • Pipework
  • Fittings